HyperX Alloy MKW100 Manual

Overview

What's Included

• HyperX Alloy MKW100 Keyboard
• Non-Detachable Braided USB-A cable
• Detachable Wrist Rest

Media control keys
Volume control keys
Game Mode key
LED mode control keys
Game Mode / Num Lock / Caps Lock indicators
LED color control keys (Solid Lighting Effect only)
LED brightness control keys
LED light bar
Detachable wrist rest

Installation

Connect the USB-A connector to the computer or game console

Function Keys

Press and a function key at the same time to activate its secondary feature as indicated on the keycap side-print.

Function Keys	Secondary Feature
	Skip back, Play/Pause, or Skip forward through your media.
	Mute, Decrease, or Increase computer audio.
	Enable Game Mode to disable the Windows key and prevent accidental interruption during gaming. The Game Mode indicator will illuminate when Game Mode is enabled.
	Cycle between the 6 built-in Lighting Effects RGB Wave <-> Stacking <-> Solid <-> Breathing <-> Color Cycle <-> Paint
	Increase or decrease the LED backlight brightness. There are 5 levels of brightness.
	Cycle between the 5 built-in LED colors. Only applies for Solid Lighting Effect Red <-> Purple <-> Green <-> Yellow <-> Blue

HyperX NGENUITY Software

To customize Lighting, Game Mode and Macro Settings, download the HyperX NGENUITY Software at: hyperxgaming.com/ngenuity.

There are 6 Lighting Effects that are customizable within NGENUITY
RGB Wave, Stacking, Solid, Breathing, Color Cycle, Paint

All customization changes made within NGENUITY are automatically saved onto the keyboard's onboard memory. Settings are retained when moving the keyboard from one system to another. However, if another system has NGENUITY running with the keyboard attached, NGENUITY will overwrite the settings stored on the keyboard's onboard memory.

When NGENUITY is running, NGENUITY will take priority for keyboard customization control and function keys for Lighting Effects will not function.

When NGENUITY is not running, the keyboard's onboard memory will be used and function keys for Lighting Effects will function.

Factory Reset

If you are experiencing any issues with the keyboard, you can perform a factory reset. Onboard memory will be cleared, and all settings will revert to factory default settings.

Press and hold FN + ESC for 5 seconds to perform a factory reset of the keyboard. The Game Mode / Num Lock / Caps Lock indicators will flash rapidly and return to normal once reset is complete.

Specifications

Keyboard Specifications

Switch Specifications

Keycap Specifications

Physical Specifications

* Per-key RGB lighting customizable with HyperX NGENUITY software

Questions or Setup Issues?

Contact the HyperX support team at: hyperxgaming.com/support/