HyperX Alloy FPS Pro HX-KB4RD1 - Mechanical Gaming Keyboard Manual

What's included

• HyperX Alloy FPS Pro Mechanical Gaming Keyboard
  
• Detachable USB cable
  

Keyboard Overview

1. F6 F7 F8 = Media keys.
2. F9 F10 F11 = Volume control keys.
3. F12 = Game Mode key.
4. Game Mode / Caps Lock indicators.
5. Up & Down = LED brightness control keys.
6. Left & Right = LED mode control keys.
7. Back mini USB port = Keyboard USB cable port.

Keyboard Installation

1. Connect the Mini USB connector to the keyboard.
2. Connect the USB connectors to the computer.

Function Keys

Press "FN" and a function key at the same time to activate it's secondary feature.

Function Keys	Secondary Feature
	Play/pause , skip backwards or skip forward your music or video.
	Mute , decrease or increase your computer audio.
	Enable Game Mode to disable the Windows key and avoid accidental interruption during gaming. When Game Mode is enabled the indicator will illuminate.
	Increase or decrease the LED backlight brightness. There are 5 levels of brightness: OFF, 25%, 50%, 75% and 100%.
	Switch between the LED backlight modes with the following keys / .

LED backlight modes

There are six LED backlight modes: Solid ► Breathing ► Trigger ► Explosion ► Wave ► Custom.

1. Solid: Constant lightning (default setting).
2. Breathing: Slow blinking that mimics breathing.
3. Trigger: Individuals keys will light up when pressed and slowly fade after one second.
4. Explosion: A lighting effect will radiate from individual keys when pressed.
5. Wave: Keys will light up from left to right in a wave pattern.
6. Custom: You can choose which keys you want to light up. Follow these steps to customize:
   1. Switch the backlight mode to custom.
   2. Hold + Right until the backlight turns off.
   3. Press the key or keys you want to have backlight ON.
   4. When finished, press + Right again to save your custom backlight profile.

Keyboard factory reset

If you are experiencing any issue with the keyboard you can perform a factory reset. You will lose your custom LED profile by doing this.

Function Keys	Secondary Feature
+	Press both keys for 3 seconds until the keyboard backlight blinks.