Table of Contents
Advertisement
DATE SETTING:
The default date is 1. 1. of year 2009. The date will be updated automatically
with the date from the computer when the display is synchronized with the USB
transceiver and connected to the Heavy Weather Pro software. The date can
also be set manually by following the steps below.
1. The year digit starts flashing.
2. Press the
UP ARROW key or
set the year. The range runs from "00" (2000) to "99"
(2099).
3. Press the SET key to confirm the year and enter the
month setting. The month digit will start flashing.
4. Press the
UP ARROW key or
set the month.
5. Press the SET key to confirm the month and enter the date setting mode.
The date digit will start flashing.
6. Press the
UP ARROW key or
7. Press the SET key to confirm and to enter the °F/°C TEMPERATURE UNIT
SETTING.
°F/°C TEMPERATURE UNIT SETTING
The temperature can be displayed in °F or °C. (default °F)
1. The temperature unit is flashing
2. Press the
UP ARROW key or
toggle between "°F" or "°C".
3. Press the SET key to confirm and to enter the WIND
SPEED UNIT SETTING.
WIND SPEED UNIT SETTING
The wind speed unit can be set as mph (miles per hour), km/h
(kilometers per hour), bft (Beaufort), knots, or m/s (meters per
second). The default unit is mph.
1. Press the
UP ARROW key or
DOWN ARROW key to
DOWN ARROW key to
DOWN ARROW key to set the date.
DOWN ARROW key to
DOWN ARROW key to
P a g e
| 16
Advertisement
Table of Contents
