Battery Safety Notice (Applicable If A Remote Control Is Provided); Care And Cleaning - BenQ MOBIUZ EX Series User Manual

Battery safety notice (applicable if a remote control is
provided)
The use of the wrong type of batteries may cause chemical leaks or explosion. Please note the
following:
• Always ensure that the batteries are inserted with the positive and negative terminals in the
correct direction as shown in the battery compartment.
• Different types of batteries have different characteristics. Do not mix different types.
• Do not mix old and new batteries. Mixing old and new batteries will shorten battery life or cause
chemical leaks from the old batteries.
• When batteries fail to function, replace them immediately.
• Chemicals which leak from batteries may cause skin irritation. If any chemical matter seeps out
of the batteries, wipe it up immediately using a dry cloth, and replace the batteries as soon as
possible.
• Due to varying storage conditions, the battery life for the batteries included with your product
may be shortened. Replace them within 3 months or as soon as you can after initial use.
• There may be local restrictions on the disposal or recycling of batteries. Consult your local
regulations or waste disposal provider.
If the supplied remote control contains a coin / button cell battery, pay attention to the following
notice as well.
• Do not ingest battery. Chemical Burn Hazard.
• The remote control supplied with this product contains a coin / button cell battery. If the coin /
button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead
to death.
• Keep new and used batteries away from children. If the battery compartment does not close
securely, stop using the product and keep it away from children.
• If you think batteries might have been swallowed or placed inside any part of the body, seek
immediate medical attention.

Care and cleaning

• Do not place the monitor face down on the floor or a desk surface directly. Otherwise, scratches
on the panel surface may occur.
• The equipment is to be secured to the building structure before operation.
• (For models that support wall or ceiling mounting)
• Install your monitor and monitor mounting kit on a wall with flat surface.
• Ensure that the wall material and the standard wall mount bracket (purchased separately) are stable
enough to support the weight of the monitor.
• Turn off the monitor and the power before disconnecting the cables from the monitor.
• Always unplug the product from the power outlet before cleaning. Clean the monitor surface
with a lint-free, non-abrasive cloth. Avoid using any liquid, aerosol or glass cleaners.
• Slots and openings on the back or top of the cabinet are for ventilation. They must not be
blocked or covered. Your monitor should never be placed near or over a radiator or heat
sources, or in a built-in installation unless proper ventilation is provided.
• Do not place heavy loads on the monitor to avoid possible personal injury or damage to the
monitor.
• Consider keeping the box and packaging in storage for use in the future when you may need to
transport the monitor.
• Refer to the product label for information on power rating, manufacture date, and identification
markings.
8