Table of Contents
Advertisement
Features of the Thermo-Hygro Sensor
The thermo-hygro sensor measures the outdoor temperature and
relative humidity. It also collects the readings from the rain and wind
sensors before transmitting the data to the base station by wireless
433MHz or by the 32ft cable included in this set.
Features of Wind sensor
The wind sensor measures wind speed and wind direction and sends
the data to thermo-hygro sensor, which in turn transmits the data to
the base station. Operating power is taken from the thermo-hygro
sensor using a 32ft cable connection.
Features of Rain sensor
The rain sensor measures the rainfall and sends the data to thermo-
hygro sensor, which in turn transmits the data to the base station.
Operating power is taken from the thermo-hygro sensor by a 32ft
cable connection.
3.
Safety Notes
•
Damage caused by failure to comply with this instruction manual will
invalidate any guarantee! The manufacturer and supplier will not be
held liable for damages due to failure to comply with this instruction
manual or from data inaccuracies that may occur with this product!
•
In case of harm or damage to a person or property caused by
improper handling or failure to comply with this instruction manual,
the manufacturer and supplier cannot be held liable.
•
For reasons of safety and operation, alterations to this device are
strictly prohibited.
•
To operate the weather station, use only supplied adaptor and
batteries of the recommended type.
•
Do not leave discharged batteries in the device as these may corrode
and release chemicals that may damage the unit.
•
Inserting batteries in an incorrect polarity will cause damage to this
product.
•
This product is not a toy kept out of the reach of children.
•
Do not dispose of new or used batteries in a fire as they may
explosion or release dangerous chemicals.
•
This product is not to be used for medical purposes or for public
information.
4.
Packaged Contents
Before setting up, carefully unpack the contents onto a table or flat
surface and check that the following are complete:
Item:
Consisting of:
Fittings:
Base
• Main unit
• AD/DC 120V power
Station
Adaptor - optional use
(included)
• Main unit
• 32ft cable - optional
Thermo-
Hygro
• Rain protection
connection to the
Sensor
cover
base station
(included)
• Wall mounting screws
• Plastic anchors for
screws
Wind
• Main unit with
• 2 x U-bolts for mast
Sensor
wind vane
holder
• 32ft cable
• 4 x Washers
(already
• 4 x Nuts
attached to the
• 1 x screw (to fix main
main unit)
unit to the mast holder
• Mast holder
Rain
• Main unit (base
Sensor
and funnel)
• 32ft cable
(already
attached to the
main unit)
Heavy
CD-Rom format
• 6.5ft PC cable for PC
weather
(English and
connection - optional
use (included)
PC
German
softwar
language)
e
Illustration:
Advertisement
Table of Contents
