Table of Contents
Advertisement
Features of the base station:
•
Receives and displays the WWVB radio controlled time and date
•
Display of extensive weather data, in all cases with programmable alarm
functions for certain weather conditions as well as records of all minimum
and maximum values along with time and date of their recordings
•
Indoor and outdoor temperature displays in degrees Fahrenheit or
Celsius (user selectable)
•
Indoor and outdoor relative humidity displays
•
Air pressure reading in inHg or hPa, absolute or relative (user selectable)
•
Detailed display of rainfall data in 1 hour, 24 hours, total since last reset
(user selectable in mm or inch)
•
Wind speed in mph, km/h, m/s, knots or Beaufort (user selectable)
•
Wind direction display with LCD compass as well as numerical (e.g. 225°)
and abbreviated characters (e.g. SW)
•
Wind chill temperature display
•
Dew point temperature display
•
Weather forecast display by weather icons (sunny, cloudy, rainy)
•
Weather tendency indicator
•
Storm warning alarm
•
LED back light
•
Simultaneous display of all weather data with individual settings by the
user
•
COM port for easy connection to your PC
•
All the weather data from the base station and up to 175 sets of weather
history data with user adjustable measuring intervals can be recorded
and uploaded to your PC
Features of the Thermo-Hygro Sensor
The thermo-hygro sensor measures the outdoor temperature and relative
humidity. It also collects the readings from the rain and wind sensors before
transmitting the data to the base station by wireless 433MHz or by the 32ft
cable included in this set.
Features of Wind sensor
The wind sensor measures wind speed and wind direction and sends the data
to thermo-hygro sensor, which in turn transmits the data to the base station.
Operating power is taken from the thermo-hygro sensor using a 32ft cable
connection.
Features of Rain sensor
The rain sensor measures the rainfall and sends the data to thermo-hygro
sensor, which in turn transmits the data to the base station. Operating power
is taken from the thermo-hygro sensor by a 32ft cable connection.
3.
Safety Notes
•
Damage caused by failure to comply with this instruction manual will
invalidate any guarantee! The manufacturer and supplier will not be held
liable for damages due to failure to comply with this instruction manual or
from data inaccuracies that may occur with this product!
•
In case of harm or damage to a person or property caused by improper
handling or failure to comply with this instruction manual, the
manufacturer and supplier cannot be held liable.
•
For reasons of safety and operation, alterations to this device are strictly
prohibited.
•
To operate the weather station, use only supplied adaptor and batteries
of the recommended type.
•
Do not leave discharged batteries in the device as these may corrode
and release chemicals that may damage the unit.
•
Inserting batteries in an incorrect polarity will cause damage to this
product.
•
This product is not a toy. Keep out of the reach of children.
•
Do not dispose of new or used batteries in a fire as they may explosion or
release dangerous chemicals.
•
This product is not to be used for medical purposes or for public
information.
•
Any modification or alteration to this product is strictly prohibited without
the manufacturer's authorization and may prohibit the user's further use
of this product.
Advertisement
Table of Contents
