Table of Contents
Advertisement
ASSEMBLY / OPERATING INSTRUCTIONS
To assemble Activity Centre frame...
1a.
Connect the 3 x Base Frames, making sure the
1
push pins are located in the holes and secure
correctly.
1b.
Manually rotate the small White feet to ensure
they are sitting flat on the floor.
2a.
Insert 3 x Legs into the leg housings on the Base
2
Frame until secure.
3a.
Lay the Floor Pad inside the Base Frame.
3
3b.
Secure the Floor Pad to the Base frame via the
6 x Velcro Straps.
4a.
Whilst holding the Top Tray, feed a Leg strap end
4
through the slot in the Top Tray and secure into
the first height setting on the underside of the
Top Tray.
Push the webbing inside the slot between
the height adjustment settings to ensure the
webbing is held well.
Repeat for the remaining 2 x Legs straps until
4b.
Top Tray is secure at all three points.
NOTE: All 3 x Leg Straps must be on the same
height setting.
5a.
Insert Seat into the Seat hole in the Top Tray.
5
Push down until Seat is connected and secure.
5b.
NOTE: Seat should now be able to rotate 360°.
7
Advertisement
Table of Contents
