Enroll/Delete Remote Keyfob/Keypad - Umbrella Mesh Network Umbra Legacy User Manual

Umbra Legacy
User guide -
Enroll Remote Keyfob—8 available slots
•
With the Umbra Legacy panel in the disarmed state, press and hold the "Enroll" button for 3 seconds.
The panel will emit the "correct operation" short "Di" and the display will flash "E1" if the slot is availa-
ble. If the slot is not available, the display will show "E1" steady.
•
To enroll a keyfob or keypad into this slot if it is available, trigger the device.
•
To enrol a keyfob or keypad into a different slot, press the "WiFi" button to go to the next slot and the
display will show the next device slot.
1. Press "enroll" for 3s
4. Press "WiFi" to enroll next
Delete Remote Keyfob
•
With desired slot selected on display—press and hold "WiFi" button for 3 seconds to delete
Brought to you by Umbrella Mesh Network
Press "Enroll" button 4 times to exit at any time.
Umbrella Mesh Network, LLC
510 W. Amador Ave., Las Cruces, NM 88005
(855) 602-5276
2. Trigger Device
3. Enroll Succeeded
Ben@umbrellameshnetwork.com
8