Enroll/Delete Wireless Siren - Umbrella Mesh Network Umbra Legacy User Manual

Umbra Legacy
User guide -
Enroll Wireless Siren—1 slot available
•
With the Umbra Legacy panel in the disarmed state, press and hold the "Enroll" button for 3 seconds.
The panel will emit the "correct operation" short "Di" and then press the "Enroll" button again 3 times to
get to the Siren slot. The display will flash "S1" if the slot is available. If the slot is not available, the dis-
play will show "S1" steady.
•
To enroll a RFID Prox Tag/Card into this slot if it is available, trigger the siren's enroll button.
•
There is only 1 device slot available for a wireless siren, so if the slot is already in use, please follow the
delete instructions below.
1. Press "enroll" for 3s,
then press again x3 for Siren
Delete Wireless Siren
•
With Siren slot selected on display—press and hold "WiFi" button for 3 seconds to delete
Brought to you by Umbrella Mesh Network
Press "Enroll" button to exit at any time.
Umbrella Mesh Network, LLC
510 W. Amador Ave., Las Cruces, NM 88005
(855) 602-5276
2. Trigger Siren's
Enrollment feature
3. Enroll Succeeded
Ben@umbrellameshnetwork.com
11