Umbra Legacy
User guide -
Factory Default
•
With the Umbra Legacy panel fully powered down, apply power via the 12V DC port on the back while
holding together the "Enroll" button and the "SOS" Button together for a full 15 seconds to perform a full
factory default.
The Umbra Legacy panel will now be defaulted back to factory settings, with all wireless devices and RFID
proximity Tags/Cards removed.
Brought to you by Umbrella Mesh Network
Umbrella Mesh Network, LLC
510 W. Amador Ave., Las Cruces, NM 88005
(855) 602-5276
Ben@umbrellameshnetwork.com
12