Umbra Legacy
User Quick guide -
To arm entire system—both interior and perimeter
•
Close all windows and doors (the status screen will say "OF" - if any numbers are
shown, those sensors will need to be closed)
Using App—Press the Padlock/Home Icon on your App and select "Away Arm" from
•
the menu
Using Keyfob—Press the Locked Padlock on your keyfob
•
Using Keypad—Press and hold the "AWAY" Padlock for 2 seconds
•
On Umbra Legacy Panel—Press and hold the "AWAY" Padlock for 2 seconds
•
•
The system will display "ON" and begin exit countdown
Exit premises before the delay expires
•
To disarm system when you return
When you enter through the door, the keypad will emit the entry delay tone
•
Using App—Press the Padlock/Home icon on your App and select "Disarm" from the
•
menu
•
Using Proximity Card—Present your proximity tag to the reader area of the panel
Using Keyfob—Press the Unlock Padlock on your keyfob
•
Using Keypad—Enter your 4 –digit user code followed by the "DISARM" Unlock icon,
•
or present your user proximity tag within the entry delay. (If the keypad is battery on-
ly—press and hold the * key for 2 seconds to activate proximity reader)
If you make an error, press the "*" key and try again.
•
The system will display "OF" when disarmed
•
To arm perimeter of building and still move freely inside
•
Close all windows and doors (the status screen will say "OF" - if any numbers are
shown, those sensors will need to be closed)
Using App—Press the Padlock/Home Icon on your App and select "Home Arm" from
•
the menu
Using Keyfob—Press the Home Icon on your keyfob
•
Using Keypad—Press and hold the "HOME" Icon for 2 seconds
•
On Umbra Legacy Panel—Press and hold the "HOME" icon for 2 seconds
•
Umbrella Mesh Network, LLC
Brought to you by Umbrella Mesh Network
510 W. Amador Ave., Las Cruces, NM 88005
(855) 602-5276
Ben@umbrellameshnetwork.com
1