Enroll/Delete Wireless Detector - Umbrella Mesh Network Umbra Legacy User Manual

Umbra Legacy
User guide -
Enroll Wireless Detector—32 zone slots available
•
With the Umbra Legacy panel in the disarmed state, press and hold the "Enroll" button for 3 seconds.
The panel will emit the "correct operation" short "Di" and then press the "Enroll" button again to get to
the Zone Slots. The display will flash "01" if the slot is available. If the slot is not available, the display will
show "01" steady.
•
To enroll a wireless detector into this slot if it is available, trigger the device.
•
To enroll a wireless detector into a different slot, press the "WiFi" button to go to the next slot and the
display will show the next device slot.
1. Press "enroll" for 3s,
then press again for Zone menu
4. Press "WiFi" to enroll next
Delete Wireless Detector
•
With desired Zone slot selected on display—press and hold "WiFi" button for 3 seconds to delete
Brought to you by Umbrella Mesh Network
Press "Enroll" button 3 times to exit at any time.
Umbrella Mesh Network, LLC
510 W. Amador Ave., Las Cruces, NM 88005
(855) 602-5276
2. Trigger Device
3. Enroll Succeeded
Ben@umbrellameshnetwork.com
9