Steering And Drive Axle Information; Steering Axle; Overview - Yale A7S1 Service Manual

Steering and Drive Axle Information

STEERING AXLE

Steering angle
King pin
Wheel Camber Angle
Tonnage
Tire
Rim
Inflation Pressure
Total Weight

Overview

The steering bridge is an open welded structure with
box cross-section (see Figure 22). It is composed of
the steering bridge body, the steering cylinder, the
connecting rod and the steering wheel. The steering
trapezoid adopts a crank slider mechanism. Before
and after the steering axle by pry to the frame at the
back of the pin shaft through the bearing bolt tail
24
Steering and Drive Axle Information
Tonnage
Type of Axle body
Inner Side Wheel
Outer Side Wheel
Center to Center of Kingpins
Side Inclination Angle
2-2.5t
Drive
Steer
Drive
Steer
Drive 860KPa (124.7 psi)
Steer 860KPa (124.7 psi)
Around 115kg (253.5 lbs.)
Supported with Central Supporting Shaft
Wheel
7.00-12-12 PR
6.00-9-10 PR
5.00S-12
4.00E-09
frame, swing bridge fitness around the pin axis, around
the steering axle were about to have a steering
knuckle, wheel hub with two tapered roller bearings
after loaded on the steering shaft, wheel by pry to the
hub, rim inside of the bearing is equipped with oil seal,
keep the grease in the cavity between the wheel and
steering knuckle.
8000 YRM 2199
2-3.5t
78º
54º
810mm (31.89 in)
0º
1º
3-3.5t
28×9-15-14 PR
6.50-10-10 PR
7.00T-15
5.00F-10
970KPa (140.7 psi)
790KPa (114.6 psi)
Around 140kg (308.6 lbs.)