Procolored UV DTF-I608 Manual page 14

3.14 Peel off the transfer film on A film
3.16 Pull the transparent film back through
the bottom of the C1 axis, above the C2 axis,
and then attach it to the C3 axis
3.18 Turn on the main switch and suction
function
14
3.15 Pass the stripped A film through rail, A film
need to be the center of the B film
3.17 Pull up the wheel control handle
3.19 Press the "feed" in the software of
computer to check C3 axis for rotation
automatically and AB film for running smooth
*Due to occasional product upgrades, this manual is for reference only.