Related Manuals for Procolored A3 L1800
Summary of Contents for Procolored A3 L1800
- Page 1 A3+ Roller version Dtf Printer manual *Due to occasional product upgrades, this manual is for reference only.
- Page 2 *Due to occasional product upgrades, this manual is for reference only.
-
Page 3: Table Of Contents
Table of Contents Safety Instructions ........................3 Machine Views ..........................4 Introduction of printer buttons ....................5 1.Connect the printer ........................6 2.Install the drive .........................7 3.Install the rip software ................. 错误！未定义书签。 4.Install print curves ..................错误！未定义书签。 5.Machine Installation And Setting .............. 错误！未定义书签。... -
Page 4: Safety Instructions
6. Close supervision is necessary for any DTF printer being used by or near children. Do not leave equipment unattended while connected. 7. The A3 L1800 Roller Printer needs routine maintenance, please refer to the included manual. *Due to occasional product upgrades, this manual is for reference only. -
Page 5: Machine Views
Machine Views Film feed position Roller pet film Control button Humidity display Ink bottles Print Tray Temperature display *Due to occasional product upgrades, this manual is for reference only. -
Page 6: Introduction Of Printer Buttons
Introduction of printer buttons start Press this button to open and close the printer power button Press this button to move the print head to the cartridge change location. When detecting the service life of the cartridge market, press this button to print the head to the ink check position. -
Page 7: Connect The Printer
1. Install the roll film and waste ink bottle Video:https://www.youtube.com/watch?v=ttPdkVoihEY 1.1Install the waste ink bottle 1.2 Install pet film 1.3 Press the forward button 1.4 Place the printing platform and press the power on button *Due to occasional product upgrades, this manual is for reference only. -
Page 8: Install The Drive
2, Guide the ink Video:https://www.youtube.com/watch?v=NAAtER0UFn0 2.1 Open the ink chamber and add ink 2.2 Use a syringe to draw ink from 6 ink cartridges 2.3 Use a syringe to extract 20ml of ink from the 2.4 Press the ink key to start automatic ink waste ink pump extraction 3. - Page 9 4.Install the PRO RIP and print Video:https://www.youtube.com/watch?v=nDeuMpmUzVI ube.com/watch?v=tSQJETK8zkk 2.5 Install Driver 2.2 Select USB connection 2.6 Insert USB dongle 2.4 Install PRO RIP software 2.5 Set Print Area Size 300,420 2.6 Select the correct printer driver 2.7.Installation curve *Due to occasional product upgrades, this manual is for reference only.
- Page 10 5.print your image Video:https://www.youtube.com/watch?v=h00PBRGjz4w 3.1 Load pictures into rip software 3.2 Select Mirror Print 3.3 Coat the printed PET film with hot melt 3.4 Bake at 120 ℃ for 200 seconds adhesive powder 3.5 Press the clothes to be printed at 160 ℃ 3.6 Press the baked PET film at 160 ℃...
- Page 11 Notice: 1. The print head and waste ink pump are not covered by the warranty. Due to the characteristics of DTF ink, if the print head is not used for a long time, the print head is easily blocked. Please carefully maintain the print head. If you do not use it for more than three days, please install the print head moisturizing solution.