User Authentication Mode - Sharp BP-20M22 Quick Start Manual

USER AUTHENTICATION MODE

When user authentication mode is enabled, a count is kept of the pages printed by each account. The page counts can
be viewed in the display.
This function is enabled in the system settings. (User Authentication)
Up to 30 can be stored.
USING USER AUTHENTICATION MODE
When user authentication mode is turned on, the account number entry screen is displayed. Enter your account number
(five-digit identification number) as explained below before performing a copy or scan operation.
Enter your user
number.
User #:
Enter your account number (five digits) with the numeric keys.
1
As the account number is entered, the hyphens (-) change to asterisks ( ). If you enter an incorrect digit, press [C] key
and re-enter the correct digit.
2
• When a valid account number is entered, the current count of the
account will appear in the message display of the base screen. After 6
seconds (factory default setting), the base screen appears.
* In copy mode, the number of sheets remaining until the limit is
reached is also shown if Function Limit Setting is enabled in the
system settings.
• If an invalid account number is entered in step 1, the account number
entry screen reappears.
• When A Warning when Login Fails in the system settings is enabled, a warning message will appear and operation will not
be permitted for 1 minute if an invalid account number is entered 3 times in a row.
BEFORE USING THE MACHINE
When the copy job is finished, press
the [LOGOUT] key .
( )
Copies: 000, 000, 000
Remaining: 000, 000, 222
23