Advertisement
Legacy Modular Conference Table • INSTRUCTIONS
(LCTRT14452, LCTRT16852, LCTRT19252, LCTRT21652, LCTRT21652,
LCTRT24052, LCTRT26452, LCTRT28852)
Organize your parts. You may need a rubber mallet.
STEP 1: Attach Stringer(A) to one of the End Legs(A) by lining up the Eclip with its corresponding holes, and sliding down
into place (see figure 1.) Please Note: End Legs (A) have EClip attachment holes on one side only.
Figure 1
STEP 2: Attach Stringer(D) to Center Leg(B) by lining up Eclip with it's corresponding hole, and sliding down into place.
Please Note: Center Legs (B) have EClip attachment holes on both sides.
D
B
A
Any problems or questions call Regency Office Furniture at 1-866-816-9822
Advertisement
