Regency LADSR7130 Instructions

You will need 2 person(s) for this assembly. You will need a Phillips head screw driver.
Hardware: A: Grommet(1) • B: Cam Pins(33) • C: Caps(33) • D: Small Screws(24) • E: Flat Brackets (4)
A B
Parts: F: Desk Modesty • G: Right Desk Leg • H: Left Desk Leg • I: Desk Shelf • J:Desk top
•K: Return Modesty • L: CPU Base • M: Right CPU Leg • N: Left CPU Leg • O: Return Top.
F
G
M
STEP 1 : Lay Desk Top(J) face down and
insert 6 cam pins (B) .
B
B

IMPORTANT NOTICE:

● Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
● Check to be sure that you have all parts and hardware.
● Remove all wrapping materials, including staples & packing straps before you start to assemble.
● Do not tighten all screws/bolts until completely assembled.
● Keep all hardware parts out of reach of children.
LADSR7130, LADSL7130 • INSTRUCTIONS
E
C D
H
N
B
J
B
B
B
Any problems or questions call Regency Office Furniture at 1-866-816-9822
Figure 1: To open Cam, point
arrow toward Cam Pin hole.
To lock Cam, turn clockwise.
I
J
STEP 2 : Insert 2 Cam Pins(B) into Desk Modesty(F) then
attach Desk Shelf(I) to Modesty and Lock cams
B
B
F
K L
O
I
F
(see fig 1) .