Regency Legacy LCTRT7135 Instructions

Race Track Conferencing Table • LCTRT7135-LCTRT9543 • INSTRUCTIONS
Organize your parts and hardware. You will need a Phillips head and flat head screw driver and rubber mallet.

Hardware :

A: 4 corner brackets(4) • B: Screws(24) • C: cam pins(9) • D: Cam lock covers(9)
A

Parts :

E: Table Top • F: Modesty Pannel • G: End Leg (2)
E
IMPORTANT NOTICE:
● Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
● Check to be sure that you have all parts and hardware.
● Remove all wrapping materials, including staples & packing straps before you start to assemble.
● Do not tighten all screws/bolts until completely assembled.
● Keep all hardware parts out of reach of children.
2 people are needed for assembly.
C
B
F
STEP 2 : Place 5 cam pins(C) into top(E)
C
C
Any problems or questions call Regency Office Furniture at 1-866-816-9822
D
STEP 1 : Place 2 cam pins(C) in each
G
end leg(G).
E
C
C
G
C
c
c