Home Decorators Collection 64108 Use And Care Manual page 5

□
□
□
□
□
□
□
□
□
FOR YOUR SAFETY
□ Surfaces of fire pit can remain extremely hot for a period after use.
Allow 45 minutes to cool down before touching or moving the fire
pit.
□ You must provide propane gas and propane cylinder. Use a
standard 20 lb. propane cylinder only.
□ Use this fire pit only with a propane withdrawal supply system. See
Chapter 5 of the Standard for Storage and Handling of Liquefied
Petroleum Gas, ANS/NFPA 58. Your local library or fire department
should have this book.
□ The pressure regulator and hose assembly supplied with the
appliance must be used.
□ The installation must conform with local codes, or in absence of
local codes, with National Fuel Gas Code, ANSI Z223.1.
□ A dented, rusted, or damaged propane cylinder may be hazardous
and should be checked by your cylinder supplier.
□ Never use a propane cylinder with a damaged valve connection.
□ The LP gas supply cylinder must be constructed and marked in
accordance with the U.S. Department of Transportation (D.O.T.)
Specifications for LP Gas Cylinders, or the tandard
□
□
□
□
□
□
□
□ DO NOT OBSTRUCT the combustion process or air ventilation flow.
□ Keep the ventilation opening(s) of the cylinder enclosure free and
clear from debris.
□ Keep the appliance area clear and free from combustible
materials, gasoline, and other flammable vapors and liquids.
□ Installation and repair should be done by a qualified service
person. The fire pit should be inspected before each use and at
least annually by a qualified service person.
□ More frequent cleaning and maintenance may be required as
necessary. It is imperative that the control compartment, burners,
and circulating air passageways of the fire pit be kept clean.
□
4