Table of Contents
Advertisement
• Select the Intellivox to have its settings file uploaded by
clicking on it once, highlighting its model number and
address, if it is not already highlighted. Click File >
Load settings..., which will open two dialogue
boxes: Load control parameters settings (see below)
and Control parameters .
Fig.19 Load Control parameters settings dialogue box.
• The File Name field (at the top of the Load control
parameters settings dialogue box) indicates the last-
used settings file name. If this is the first time that the
installation of WinControl has been used, a default
settings file is selected. The default location for this
file is in My Documents\JBL\WinControl\
Settings, though as this is alterable, it is possible
that a different location may be displayed, depending
on how the particular PC being used has been set up.
* See WinControl Help files for information regarding further Load options.
22
JBL
Intellivox HP series Installation Manual Rev 2.1
®
To navigate to the location containing the settings
file to be uploaded, click on the Browse button
(the folder symbol to the right of the File Name
field), which will open a further Open dialogue box.
Navigation may be continued in the normal Windows
manner. Note that Intellivox settings files always have
an *.ini file extension.
• Select the correct settings file and click Open. Then
in the Load control parameters settings dialogue
box, click OK* to continue. An Info dialogue box
will then open showing additional information;
click OK in this box to start the upload process.
This will transfer the pre-determined Intellivox
parameters to the loudspeaker. The Control
parameters dialogue box can now be closed and
the upload is complete.
• If there are further loudspeakers on the network to
have their settings files uploaded at this time, the
procedure can be repeated by selecting the next
Intellivox. It is possible to load the same settings file
into several Intellivoxes simultaneously, should the
installation require this. See Addresses and Groups in
the WinControl Help file for more information.
202007/IvxHPIM_v2.1
Advertisement
Table of Contents
