BARTACK FEED OF BUTTONHOLE
To check:
If the material is feed forward or backward when sewing bartack on buttonhole, make an
adjustment as follows:
Adjustment procedure:
1.
Set the pattern selector dial at "
2.
Remove the front cover (See page 6).
3.
Place a piece of paper under the foot and turn the handwheel.
If the paper is feed forward, turn the adjusting screw in the direction of (C).
If the paper is feed backward, turn the adjusting screw in the direction of (D).
4.
Attach the front cover.
Forward feeding
Backward feeding
MECHANICAL ADJUSTMENT
4
", and the stitch length dial at "4".
2
Stitch length dial
(D)
20
(C)
Adjusting screw
MODEL BL9