GARDEN MASTER GM3830 Assembly Instructions

Your Fixings Pack will be attached to your roof panel.
Thank you for ordering your shed in NZ's most simple system.
Thank you for ordering your shed in NZ's most simple system.
Drill and drill bits - 3.3mm (1/8th") for shed and 5mm (3/16th") for padbolt
Screwdriver or Riveter. (Note: all colour sheds come with rivets only)
Tape measure for roof overhang.
Ladder for fixing down thru the top of the roof.
Non slip gloves, good shoes, goggles, a helping set of hands and no gusty winds!
Recessed floor clamps Flat floor clamps
For especially poured floors For existing concrete only.
with recess around perimeter. Water can seep underneath.
Feedback....
As we are forever trying to make sure you are our happiest customer, we are always on the lookout for ways in which
we could do better. Please fax us on
your thoughts. To help you we have listed a few aspects that we would like you to comment on. You do not have to
include your details, but if you do we
will forward you a free gift.
1.Finding out about our range of garden sheds and the various options we offer....
2.The store and the sales person that you purchased from....
3.The delivery and the overall dealings for the purchase of your shed....
4.The assembly of your shed and clarity of instructions....
5.Did the shed fit your needs? What will you order differently next time?
GM3830
3770mm W x 3030mm D x 1830 - 2090mm H
Your instructions for assembly are in this package...
What tools will I need?
It is utmost essential that every shed has a
floor, but the only way to make sure your shed
is there to stay on windy sites is with a re-
cessed concrete floor and phone
SHED for more free advise
06 878 5758 or send us an email to
GM3830
- Gable Roof Shed
"IN ONLY 6 PANELS"
"IN ONLY 6 PANELS"
Just join your corners and fix the roof on!
Shed shown in picture is not necessarily to
the specification you ordered
.
0800 80
.
feedback@gardenmastersheds.co.nz with