Tesla MODEL 3 2020 Owner's Manual page 231

Understanding Tire Markings
Laws require tire manufacturers to place standardized information on the sidewall of all tires.
This information identifies and describes the fundamental characteristics of the tire.
1 Tire category. P indicates that the tire is for passenger vehicles.
2 Tire width. This 3-digit number is the width (in millimeters) of the tire from sidewall edge
to sidewall edge.
3 Aspect ratio. This 2-digit number is the sidewall height as a percentage of the tread
width. So, if the tread width is 205 mm, and the aspect ratio is 50, the sidewall height is
102 mm.
4 Tire construction. R indicates that the tire is of Radial ply construction.
5 Wheel diameter. This 2-digit number is the diameter of the wheel rim in inches.
6 Load index. This 2 or 3-digit number is the weight each tire can support. This number is
not always shown.
7 Speed rating. When stated, indicates the maximum speed (in mph) at which the tire can
be used for extended periods. Q=99 mph (160 km/h), R=106 mph (170 km/h), S=112 mph
(180 km/h), T=118 mph (190 km/h), U=124 mph (200 km/h), H=130 mph (210 km/h),
V=149 mph (240 km/h), W=168 mph (270 km/h), Y=186 mph (300 km/h).
Specifications
Wheels and Tires
229