Table of Contents
Advertisement
Compressor Pressure Adjustment
The compressor pressure is factory set and must be checked and
adjusted by qualified technicians only. Tampering with the unit may be
dangerous.
Remove pressure gauge cap. Connect a pressure gauge on the pressure
measuring port on the rear guard. Start heater and read air pressure value. If
necessary adjust pressure to the correct value turning the adjusting screw (the
air vent hole in the adjusting screw middle) clockwise to increase, anticlockwise
to decrease the pressure:
Model
CT2142
Electrical
Inspect cables, electrical parts and connections.
Air Pressure (bar)
0.31
12
Advertisement
Table of Contents
