Table of Contents
Advertisement
Quick Links
15KW PROPANE SPACE HEATER - GAS TYPE CT2140
30KW PROPANE SPACE HEATER - GAS TYPE CT2141
ORIGINAL INSTRUCTIONS
IMPORTANT:
Read and follow all instructions. Place instructions in a safe place for future reference. Do not
allow anyone who has not read these instructions to assemble, light, adjust or operate the
heater.
This product is not suitable for primary heating purposes.
Cannon Tools Limited
Address:20 Station Road, Rowley Regis, West Midlands, B65 0JU.UNITED KINGDOM
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Jobsite CT2140
Summary of Contents for Jobsite CT2140
- Page 1 15KW PROPANE SPACE HEATER - GAS TYPE CT2140 30KW PROPANE SPACE HEATER - GAS TYPE CT2141 ORIGINAL INSTRUCTIONS IMPORTANT: Read and follow all instructions. Place instructions in a safe place for future reference. Do not allow anyone who has not read these instructions to assemble, light, adjust or operate the heater.
-
Page 2: Ec Declaration Of Conformity
In case of alteration of the machine, not agreed upon by us, this declaration will lose its validity. Product description: 15KW PROPANE SPACE HEATER - GAS TYPE Model: CT2140 Product description: 30KW PROPANE SPACE HEATER - GAS TYPE Model: CT2141... -
Page 3: Specification
1. SPECIFICATION Model CT2140 CT2141 Rating 51,180BTU 102,360BTU (15kw) (30kw) Fuel Consumption 1.09kg/h 2.18kg/h Air Flow 580m 1000m Fuel Orifice Port 0.90mm 1.28mm Size Air Flow Temp. 420℃ 430℃ Type Of Gas For use with LPG only Gas Supply 0.7Bar 0.7Bar... -
Page 4: Important Safety Information
2. IMPORTANT SAFETY INFORMATION WARNINGS! Your safety is important to you and to others, so please read these instructions before you operate this heater. GENERAL HAZARD WARNING: Failure to comply with the precautions and instructions provided with heater, can result in death, serious bodily injury and property loss or damage from hazards of fire, explosion, burn, asphyxiation, carbon monxide poisoning, and/or electrical shock. - Page 5 Use of a cord suitable for outdoor use reduces the risk of electric shock. f) If operating a heater in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.
- Page 6 hazardous situation. WARNING: In order to avoid overheating, do not cover the heater. 5) Service a) Have your heater serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the heater is maintained. 6) Use in environments with no permanent presence of people.
- Page 7 provided with this heater, can result in death, serious bodily injury and property loss or damage from hazards of fire, explosion, burn, asphyxiation, carbon monoxide poisoning, and/or electrical shock. - Only persons who can understand and follow the instructions should use or service this heater.
- Page 8 heated. To avoid this effect, or at least to reduce it, use a large cylinder or two cylinders linked together (Figure1). Do not use the heater in cellars, basements or in any room below the ground level. In case of malfunction, please contact the technical assistance service.
-
Page 9: Technical Description
3. TECHNICAL DESCRIPTION... -
Page 11: Unpacking And Checking
4. UNPACKING AND CHECKING Carefully remove the machine from the packaging and examine it for any sign of damage that may have happened during shipping. Lay the contents out and check them against the parts shown below. If any part is damaged or missing;... - Page 12 b. Push the gas valve button and push repeatedly the piezoelectric lighter until the flame lights up. (Figure. 3-4) Figure.3 Figure.4 c. As the flame lights up, keep the valve button pushed for 10 seconds approx. Should the heater stop when the valve button has been released, wait one minute and repeat the starting operation keeping the valve button pushed for a longer time.
-
Page 13: Maintenance
4.Proper ventilation air must be provided to support the combustion air requirements of the heater being used. 5.Lack of proper ventilation air will lead to improper combustion. 6.Improper combustion can lead to carbon monoxide poisoning leading to serious injury or death. Symptom of carbon monoxide poisoning can include headaches dizziness and difficulty in breathing. -
Page 14: Wiring Diagram
following: a. Periodically check the gas supply hose conditions and, should it be changed, use only original spare parts. b. Check the starting electrode position (see Figure.5). Figure.5 Check the connections of the safety thermostat and of the thermocouple: they must always be clean. If necessary clean the fan blade and the inside of the heater using compressed air. -
Page 15: Troubleshooting
8. TROUBLESHOOTING PROBEM CAUSES SOLUTIONS The motor does No electricity supply Check the terminal board with a not work tester The safety thermostat is on Wait about one minute then restart motor The cylinder gas tap is Open the gas tap works, but the closed burner does not... -
Page 16: Disposal Guidelines
9. DISPOSAL GUIDELINES Do not dispose of this product with general household waste. This product must be disposed according to the laws governing Waste Electrical and Electronic Equipment. If required, contact your local authorities for information regarding the available disposal facilities. 10. - Page 17 11. ENERGY EFFICIENCY TABLE Model identifier(s): CT2140 Indirect heating functionality: [no] Direct heat output: 15(kW) Indirect heat output: N/A (kW) Space heating emissions (*) Fuel 115.54[mg/kWh input ] (GCV) Select fuel type [gaseous] Item Symbol Value Unit Item Symbol Value...
- Page 18 Room temperature control, with open [no] window detection with distance control option [no] with adaptive start control [no] with working time limitation [no] with black bulb sensor [no] Permanent pilot flame power requirement Pilot flame power requirement (if P pilot 0 applicable) (*) NOx = nitrogen oxides The seasonal space heating energy efficiency η...
- Page 19 Model identifier(s): CT2141 Indirect heating functionality: [no] Direct heat output: 30(kW) Indirect heat output: N/A (kW) Space heating emissions (*) Fuel Select fuel type [gaseous] 120.41[mg/kWh input ] (GCV) Item Item Symbol Value Unit Symbol Value Unit Heat output Useful efficiency (NCV) Nominal heat Useful efficiency at P nom...
- Page 20 with distance control option [no] with adaptive start control [no] with working time limitation [no] with black bulb sensor [no] Permanent pilot flame power requirement Pilot flame power requirement (if applicable) pilot (*) NOx = nitrogen oxides The seasonal space heating energy efficiency η S Item Symbol Value...
-
Page 21: Exploded View
12. EXPLODED VIEW CT2140... - Page 23 CT2141...
- Page 25 CANNON TOOLS LTD Add: 20 station road, Rowley Regis, west midlands,B65 0JU.U.K. Made in China...
Need help?
Do you have a question about the CT2140 and is the answer not in the manual?
Questions and answers