Table of Contents
Advertisement
Quick Links
70KW INDUSTRIAL DIRECT DIESEL HEATER CT2143
ORIGINAL INSTRUCTIONS
IMPORTANT:
These instructions accompanying the product are the original instructions. This document is
part of the product, keep it for the life of the product passing it on to any subsequent holder of
the product. Read all these instructions before assembling, operating or maintaining this
product.
Cannon Tools Limited
Address:20 Station Road, Rowley Regis, West Midlands, B65 0JU.UNITED KINGDOM
Advertisement
Table of Contents
Related Manuals for Jobsite CT2143
Summary of Contents for Jobsite CT2143
- Page 1 70KW INDUSTRIAL DIRECT DIESEL HEATER CT2143 ORIGINAL INSTRUCTIONS IMPORTANT: These instructions accompanying the product are the original instructions. This document is part of the product, keep it for the life of the product passing it on to any subsequent holder of the product.
-
Page 2: Ec Declaration Of Conformity
In case of alteration of the machine, not agreed upon by us, this declaration will lose its validity. Product description: 70KW INDUSTRIAL DIRECT DIESEL HEATER Model: CT2143 Applicable EC Directives: EC Low Voltage Directive 2014/35/EU EC Directive of Electromagnetic Compatibility 2014/30/EU... -
Page 3: Specification
1. SPECIFICATION Model CT2143 Heat Input* [kW] [Hrs] Air Flow Rating [m³/h] 1300 Fuel Type Diesel - Kerosene Fuel consumption [kg/h] Fuel Nozzle size 1.35 gph-60° Voltage [V] 220-240V 50Hz Electrical Power (Motor ) 430W Pump Pressure Setting [bar] 10.5... -
Page 4: Important Safety Information
2. IMPORTANT SAFETY INFORMATION 2.1. General Safety Rules Read instructions carefully. Read and follow all instructions. Place instructions in a safe place for future reference. Do not allow anyone who has not read these instructions to assemble, light, adjust or operate the heater. If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or loss of life. - Page 5 a heater. Do not use a heater while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating heaters may result in serious personal injuries. • Prevent unintentional starting. Ensure the switch is in the off position before connecting to power source.
- Page 6 WARNING Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. WARNING Fire, burn, inhalation, and explosion hazard. Keep solid combustibles, such as building materials, paper or cardboard, a safe distance away from the heater as recommended by the instructions.
-
Page 7: Electricity Supply
The electrical system to which the appliance is connected must comply with current legislation. Installation requires a residual current circuit breaker (rccb) in the main electrical distribution board. Unplug the appliance before performing any maintenance operations. Always check the power cable before using the appliance. It must not be bent, taut, stretched, crushed or any way damaged. -
Page 8: Technical Description
3. TECHNICAL DESCRIPTION Extract the heater from its carton. If the unit is anyhow damaged, do not use it and contact your dealer. Pos. Description Handle Feet pipe Nut M5 10or12 Plain washer 10or12 Spring washer 6or8 Screw 10or12 Nut M12 Plain washer ø12 Wheel Cotter... -
Page 9: Installation Instructions
4. INSTALLATION INSTRUCTIONS 4.1 Assembling To assemble the heater, proceed as follows 1. Insert the wheel shaft K to the corresponding hole of feet pipe B，insert the cotter J to the corresponding holes; slide the wheel I over the wheel shaft K put plain washer H to the two sides of shaft,，screw the nut G to fix the wheel on the shaft. - Page 10 ● Do not place the heater in the immediate surroundings of a bath, shower or swimming pool. ● Follow general and special fire safety regulations in force in all fields of applications. In any case ensure the following minimum safety clearances from materials or objects in the surroundings of the heater: Side: Air inlet side:...
- Page 11 If the ambient temperature is lower than default temperature, after waiting for 12 seconds per-ventilation, the heater starts. If the ambient temperature is higher than default temperature, turn thermostat control knob to desired temperature, after waiting for 7 seconds pre-ventilation, the heater starts.
-
Page 12: Cleaning, Maintenance And Storage
5. CLEANING, MAINTENANCE AND STORAGE Regularly wipe the enclosure using a soft sponge or cloth. For very dirty parts, use a sponge wetted with lukewarm water and a mild detergent, then dry using a clean cloth. Keep air inlet and fan free from dust and dirt. To clean inner parts, gently blow compressed air through air inlet. - Page 13 Extract the burner head（Fig.2） Fig.2 Whirl disc Clean the whirl disc (Fig.2) using a brush and then blow compressed air on it. To get good combustion the air flow openings in the whirl disc should be perfectly clean and free. Nozzle Carefully unscrew nozzle from nozzle fitting.
- Page 14 Fig.5 Fig.6 Model Pump Pressure (bar) CT2143 10.5 Air collar adjustment (Fig. 6) The air collar position is factory set and must be checked and adjusted by qualified technicians only. Tampering with the unit may be dangerous. HIGH ALTITUDE ISTALLATION: Due to lower oxygen rate with reference to high altitude installation on sea level, it may be necessary to increase air rate by opening the air collar (Fig.
-
Page 15: Wiring Diagram
6. WIRING DIAGRAM... -
Page 16: Troubleshooting
7. TROUBLESHOOTING PROBLEM CAUSE REMEDY Motor does not No power or low voltage Check power line and voltage start Check fuse and replace if necessary Faulty or damaged power cord Check and replace if needed Faulty motor/capacitor Check and if necessary replace E1 displayed on the screen Lock-out of appliance due to... -
Page 17: Disposal Guidelines
8. DISPOSAL GUIDELINES Do not dispose of this product with general household waste. This product must be disposed according to the laws governing Waste Electrical and Electronic Equipment. If required, contact your local authorities for information regarding the available disposal facilities. 9. -
Page 18: Exploded View
10. EXPLODED VIEW... - Page 20 CANNON TOOLS LTD Add: 20 station road, Rowley Regis, west midlands,B65 0JU.U.K. Made in China...