Table of Contents
Advertisement
Quick Links
30KW INDUSTRIAL DIRECT DIESEL HEATER CT2142
ORIGINAL INSTRUCTIONS
IMPORTANT:
These instructions accompanying the product are the original instructions. This document is
part of the product, keep it for the life of the product passing it on to any subsequent holder of
the product. Read all these instructions before assembling, operating or maintaining this
product.
This product is not suitable for primary heating purposes.
Cannon Tools Limited
Address:20 Station Road, Rowley Regis, West Midlands, B65 0JU.UNITED KINGDOM
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Jobsite CT2142
Summary of Contents for Jobsite CT2142
- Page 1 30KW INDUSTRIAL DIRECT DIESEL HEATER CT2142 ORIGINAL INSTRUCTIONS IMPORTANT: These instructions accompanying the product are the original instructions. This document is part of the product, keep it for the life of the product passing it on to any subsequent holder of the product.
-
Page 3: Ec Declaration Of Conformity
In case of alteration of the machine, not agreed upon by us, this declaration will lose its validity. Product description: 30KW INDUSTRIAL DIRECT DIESEL HEATER Model: CT2142 Applicable EC Directives: EC Low Voltage Directive 2014/35/EU EC Directive of Electromagnetic Compatibility 2014/30/EU... -
Page 4: Specification
1. SPECIFICATION Model CT2142 Heat Input [kW] * Air Flow Rating [m³/h] Fuel Type Diesel - Kerosene Fuel consumption [kg/h] Voltage [V/Hz] AC220-240V/50 Air Pressure Setting [bar] 0.31 Current Rating [A] Electrical Power [W] Fuse Rating T3.15A Dimensions Net Weight (kg) 22.2... -
Page 5: Important Safety Information
2. IMPORTANT SAFETY INFORMATION 2.1. General Safety Rules Read instructions carefully. Read and follow all instructions. Place instructions in a safe place for future reference. Do not allow anyone who has not read these instructions to assemble, light, adjust or operate the heater. If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or loss of life. - Page 6 a heater. Do not use a heater while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating heaters may result in serious personal injuries. • Prevent unintentional starting. Ensure the switch is in the off position before connecting to power source.
- Page 7 WARNING Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. WARNING Fire, burn, inhalation, and explosion hazard. Keep solid combustibles, such as building materials, paper or cardboard, a safe distance away from the heater as recommended by the instructions.
-
Page 8: Electricity Supply
The electrical system to which the appliance is connected must comply with current legislation. Installation requires a residual current circuit breaker (rccb) in the main electrical distribution board. Unplug the appliance before performing any maintenance operations. Always check the power cable before using the appliance. It must not be bent, taut, stretched, crushed or any way damaged. -
Page 9: Technical Description
3. TECHNICAL DESCRIPTION Extract the heater from its carton. If the unit is anyhow damaged, do not use it and contact your dealer. Pos. Description Handle Plain washer ø6 Clamping screw Wheel wheel shaft Plain washer ø12 Nut M12 wheel cover Cotter caster fixing plate... -
Page 10: Installation Instructions
4. INSTALLATION INSTRUCTIONS 4.1 Assembling To assemble the heater, proceed as follows 1. Insert the wheel shaft E into the corresponding hole of the caster fixing plate J, insert the cotter I to the corresponding holes of the wheel shaft; put plain washer F to the two sides of shaft, slide the wheel D over the wheel shaft E, screw the nut G to fix the wheel on the shaft，Install the wheel cover H. - Page 11 ● Floors and ceilings must be made of fireproof materials in the place where the heater is operated. ● Do not connect direct-fired heaters to air ducts. 4.3 Instructions for Use 4.3.1 Start-up Fill tank with clean fuel. Only use Diesel or Kerosene. The fuel gauge on top of the tank allows to check fuel level Connect the power cord plug to a AC220-240V 50 Hz earthed electrical supply system.
-
Page 12: Cleaning, Maintenance And Storage
4.3.3 Shut-down Move switch to "OFF" (O) position. Unplug the unit when not used for a long time. Never disconnect the heater from mains to stop it while in operation. Always allow the cooling sequence to be completed (BGO1601-50), otherwise the residual heat could damage internal components. -
Page 13: Air Filters
Do not use a faulty unit unless a qualified technician has inspected and repaired it. When cleaning, make sure that water does not enter the unit. Do not open the enclosure to clean the inner parts. Do not spray water into the heater. - Page 14 (the air vent hole in the adjusting screw middle) clockwise to increase, anticlockwise to decrease the pressure: Model Air Pressure (bar) CT2142 0.31 Electrical Inspect cables, electrical parts and connections.
-
Page 15: Wiring Diagram
6. WIRING DIAGRAM... -
Page 16: Troubleshooting
7. TROUBLESHOOTING PROBLEM CAUSE REMEDY Motor does not No power or low voltage Check power line and voltage start Check fuse and replace if necessary Faulty or damaged power cord Check and replace if needed Faulty motor/capacitor Check and if necessary replace E1 displayed on the Lock-out of appliance due to Detect the cause of overheating... -
Page 17: Disposal Guidelines
8. DISPOSAL GUIDELINES Do not dispose of this product with general household waste. This product must be disposed according to the laws governing Waste Electrical and Electronic Equipment. If required, contact your local authorities for information regarding the available disposal facilities. 9. - Page 18 10. ENERGY EFFICIENCY TABLE Model identifier(s): CT2142 Indirect heating functionality: [no] Direct heat output: 30(kW) Indirect heat output: N/A (kW) Space heating emissions (*) Fuel 69[mg/ kWh input ] (GCV) Select fuel type [liquid] Kerosene Item Item Symbol Value Uni...
- Page 19 Room temperature [no] control, with open window with distance control [no] detection option with adaptive start [no] control with working time [no] limitation with black bulb sensor [no] Permanent pilot flame power requirement Pilot flame power P pilot requirement (if applicable) (*) NOx = nitrogen oxides The seasonal space heating energy efficiency η...
-
Page 20: Exploded View
11. EXPLODED VIEW... - Page 22 CANNON TOOLS LTD Add: 20 station road, Rowley Regis, west midlands,B65 0JU.U.K. Made in China...
Need help?
Do you have a question about the CT2142 and is the answer not in the manual?
Questions and answers