Advertisement
Quick Links
TV Wall Mount Extension Bracket
Instruction Manual
V1.0
Model: PGUE1
Thank you for choosing this Perlegear product! At Perlegear we strive to
provide you with the best quality products and services in the industry.
Should you have any issues, please don't hesitate to contact us.
Technical Support:
1-800-456-5231 Mon-Fri 10am - 5pm (PST) (USA) (CAN)
Other Info:
support@perlegear.com(US)
Advertisement
Related Manuals for Perlegear PGUE1
Summary of Contents for Perlegear PGUE1
- Page 1 Instruction Manual V1.0 Model: PGUE1 Thank you for choosing this Perlegear product! At Perlegear we strive to provide you with the best quality products and services in the industry. Should you have any issues, please don't hesitate to contact us.
-
Page 2: Important Safety Information
Technical Support line at 1-800-456-5231 or customer service at support@perlegear.com. CAUTION: Avoid potential personal injuries and property damage! • Do not use this product for any purpose that is not explicitly specified in this manual. - Page 3 Technical Support line at 1-800-456-5231 or customer service at support@perlegear.com. • Please note: Not all hardware included in this package will be used. Supplied Parts and Hardware for Step 1...
- Page 4 Connect the TV Wall Mount (Not Included) to the Step 1 Extension Bracket Fully unfold the extension bracket and make sure the two halves are flushed with each other. Note: Do not firmly tighten the nuts to keep the sliding function. Connect the TV wall mount (not Included) to the extension bracket by...
- Page 5 2A-1 (Not lncluded) Use a stud finder (not included) to locate wood studs or use an awl (not included) to verify the edges. Mark the edge and center locations. 2A-2 HEAVY! You may need assistance with this step. Position the extension bracket [01] at your desired height and line up the holes with your stud center line.
- Page 6 Step 3 Horizontal Sliding Adjustment To better position your mount and TV on your wall, the mount can be horizontally slided from side to side. After sliding the wall mount at at desired position, firmly tighten four nuts [B]. 1/2 in.(13mm) Socket Wrench [Not Included] Tighten...
- Page 8 Thank you again choosing this Perlegear product! All of us at Perlegear do appreciate your product purchase. We hope that you are as happy with your product as we designing and manufacturing it for you. We strive to provide you with the best quality products and services in the industry.