Page 1
V1.0 (A) Model: PGSS8 Thank you for choosing this Perlegear product! At Perlegear we strive to provide you with the best quality products and services in the industry. Should you have any issues, please don't hesitate to contact us at...
•Check package contents against Supplied Parts and Hardware List to assure that all components were received undamaged. Do not use damaged or defective parts. lf you require replacement parts, please contact our customer service at support@perlegear.com. •Not all parts and hardware included will be used.
Page 3
STEP 1 Attach the Pad on the Base STEP 2 Connect the Post to the Base...
Page 4
STEP 3 Manage the Cable and Adjust the Height of the Post Tighten Loosen...
Page 5
STEP 4 Attach the Pad on the Speaker Holder STEP 5 Secure the Speaker to the Stand Option A: If your speaker has built-in thread hole, follow the instructions of STEP 5-1 and STEP 5A-2. Option B: If your speaker has keyhole at the back, follow the instructions of STEP 5-1 and STEP 5B-2.
Page 6
Suitable for the speaker has built-in thread hole STEP 5A-2 at the back Phillips Screwdriver (Not Included) B1/B2 Suitable for the speaker has built-in keyhole at STEP 5B-2 the back B1/B2...
Page 7
STEP 5C Suitable for the speaker has thread holes at the bottom C1/C2 Phillips Screwdriver (Not Included)
Page 8
Thank you again choosing this Perlegear product! All of us at Perlegear do appreciate your product purchase. We hope that you are as happy with your product as we designing and manufacturing it for you. We strive to provide you with the best quality products and services in the industry.