Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for AutoAqua Smart ATO Lite G2
Summary of Contents for AutoAqua Smart ATO Lite G2
- Page 1 Smart ATO Lite G2 Model SATO-266P...
- Page 2 List of Parts (Can Be Purchased Separately) Description Item Picture 1. Auto Top Off with Square Dual Sensor Smart ATO Lite G2 2. Max. Mounting Thickness : Controller 1/2 inch (12.7 mm) Input : 100-240 VAC 50-60 Hz Universal Power...
- Page 3 Installation 1. Mount the square dual sensor on the tank/sump with the magnet, and adjust the lower sensor to the desired water level.* 2. Connect one tube with the pump. Plug the siphon break into tubes, keep it higher than the water level of the reservoir, and set up the water tube with the universal holder.
- Page 4 LED Indicator LED Color Status Description Action Solid Power on N.A. N.A. Flashing Re lling/Pumping Blue The fail-safe sensor Flashing detects the water quickly for a N.A. level changes. short time** QST alarm: 1. Clean the sensor or 1. Bubble interference move it to an area 2.
- Page 5 Quick Security Technology (QST) Smart ATO Lite G2 uses QST for real-time protection against any failure situation. The controller will give a visual alert when it senses any other re lling time is 6 times longer than the rst re lling time. QST can detect the malfunction of the sensor or the controller, and the empty reservoir to avoid the pump running dry.
- Page 6 Limited Warranty 1. Limited warranty is provided by AUTOAQUA only if your AUTOAQUA Product ("Product") was purchased from an authorized distributor or an authorized reseller. 2. All warranty repairs or replacement are performed by the authorized distributor or authorized reseller in the region where the Product was rst shipped by AUTOAQUA.
Need help?
Do you have a question about the Smart ATO Lite G2 and is the answer not in the manual?
Questions and answers