Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for AutoAqua Smart ATO nano
Summary of Contents for AutoAqua Smart ATO nano
- Page 1 Smart ATO nano SATO-270D...
- Page 2 List of Parts (Can Be Purchased Separately) Item Picture Description 1. Integrated with one dual sensor and one replaceable Smart ATO nano diaphragm pump Controller 2. Mounting Thickness : 0.12-0.39 inch (3-10 mm) Input : 100-240 V 50-60 Hz Universal Power...
- Page 3 Smart ATO nano Controller Holes for Fixing Water Inlet Tube Pre lter Power Jack Open Water Inlet Water Outlet Holder Hole for Fixing Water Outlet Tube Failsafe Sensor ATO Level Sensor Specifications 1. Power Input : 100-240 V 50-60 Hz 2.
- Page 4 Installation 1. Take off the cover of Smart ATO nano controller and x it on tank/sump with the holder. 2. Mount the sensor with the magnet at the normal water level (with the water level reaching the lower one) . If the cable is too long, push it back into the main body.
- Page 5 This is normal and no action is required. Quick Security Technology (QST) Smart ATO nano uses QST for real-time protection against any failure situation. The controller will give a visual alert when it senses any other re lling time is 6 times longer than the rst lling time. QST can detect the malfuction of the sensor or the pump, and the empty reservoir to avoid the pump running dry.
- Page 6 3. Please open and clean the pre lter every 3 to 6 months for best lter performance. 4. Please visit AUTOAQUA's website to know how to replace the pump. Limited Warranty 1. Limited warranty is provided by AUTOAQUA only if your AUTOAQUA Product ("Product") was purchased from an...
Need help?
Do you have a question about the Smart ATO nano and is the answer not in the manual?
Questions and answers