Hitachi BD-120XGV Instruction Manual page 14

How to Install the Washing Machine (Continue)
The symbol M is for checking whether you install the washing machine correctly.
●
Connecting the power
M Connect the washing machine to an alternating current via a correctly installed earthed socket only.
M The mains voltage must correspond to the voltage specification on the washing machine.
M Connection specifications as well as the required fuses are stipulated on the washing machine
nameplate.
M Do not plug the washing machine into an extension lead or power strip with multiple sockets.
Level Adjustment
M All four adjustable feet must be firmly on the ground. The washing machine must not wobble.
M Check the alignment of the washing machine with a spirit level, and adjust the feet if it's not aligned.
Loosening 1
Elevating
Lock nut
14
Lock nut
Adjustable leg
Tightening 2
Metal base plate
Loosen the lock nut by unscrewing in the arrow
direction 1 then stabilize the unit with the
adjustable feet.
After adjustment, tighten the lock nut by screwing
it in the arrow direction 2.
Tighten the lock nut until
it reaches the metal base
plate.
Adjustable leg is not over
25 mm.