Device Function - Xylem MJK pHix Compact V3 NG Manual

Firmware
Status

Device function

Default
Restart device
pHix Configurator software /General information
Check for new firmware version
Load and flash firmware file
Factory firmware
Change the status for
Liquid ground
Switch ring
Tilt
4.6 pH default
7.0 pH default
Redox default
pHix® Compact V3. NG (next generation)
Set all the all the
parameters (Modbus
registers) to the default
values for the connected
sensor type.
The sensor is restarted
EN 4.10 Version 2202
46