Eletrical Mounting; Signal Cable - Xylem MJK pHix Compact V3 NG Manual

pHix® Compact V3. NG (next generation)
EN 4.10 Version 2202

Eletrical mounting

pHix® Compact must not be installed in explosion hazardous locations! pHix®
Compact should be connected to an active 4-20 mA input or supplied from a separate
10-28 VDC voltage source. Max power consumption is 50 mW.
pHix® Compact 4-20 mA output(s) is galvanically separated from the liquids potential.

Signal cable

pHix® Compact comes with two galvanically separated mA signal outputs and Modbus
RS485.
Note! pHix® Compact is delivered with cable made of PUR.
pHix® Compact with 2 x 4-20 mA outputs, one for pH or redox measurement and one
for temperature measurement.
Mounting /Eletrical mounting
19