Gasket And O-Ring - Xylem MJK pHix Compact V3 NG Manual

pHix® Compact V3. NG (next generation)
EN 4.10 Version 2202
Contact MJK if other electrode types should be used. Replacement of an electrode to
another of the same type does not require reconfiguration.
The electrode must not become dry. Therefore, do not remove the protective cap
before before commissioning of pHix® Compact.

Gasket and O-ring

It is very important that both gasket and O-ring and packing surfaces are clean and
smooth and without cracks and scratches to avoid penetration of liquid in the center
plug connection.
Check that gasket and O-ring are complete and clean and that they are placed correctly.
Likewise, the connectors in both transmitter and electrode should be absolutely clean
and dry. Use a dry cloth if needed.
Mounting /Mounting the electrode
11