Read From The Sensor - Xylem MJK pHix Compact V3 NG Manual

Connection status
The status is shown in the bottom right corner.

Read from the sensor

Click Sensor with arrow pointing towards PC on top menu bar.
When pHix Configurator is connected to the sensor, the configuration from the sensor
can be read for editing or saving.
pHix Configurator software /General information
Place the arrow over PC with 2 green arrows connected
to a unit on top menu bar. This will change to PC with 2
red arrows connected to a unit. Click it .
pHix® Compact V3. NG (next generation)
EN 4.10 Version 2202
43