Disclaimer OMCAN IS NOT RESPONSIBLE FOR DIMINISHED COOLING OR ANY DAMAGES DUE TO WATER LEAKS. WARRANTY IS VOID IF THE WICKING PAD IS NOT REPLACED EVERY SIX MONTHS, AND IF THE AMBIENT ROOM TEMPERATURE EXCEEDS 75°F AND 55% RELATIVE HUMIDITY, AND THE APPLIANCE DRAIN IS NOT CONNECTED DIRECTLY TO A FLOOR DRAIN.
If the package has suffered rough handling, bumps or damage (visible or concealed), please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be filled out within three days, from the delivery date shown in the shipping documents.
Si el paquete ha sufrido un manejo de poco cuidado, golpes o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro de las 24 horas, de modo que podamos iniciar una reclamación con la compañia.
Page 6
1 YEAR PARTS AND LABOUR WARRANTY Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized service technician to repair the equipment locally. Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not...
Safety and Warranty Please see https://omcan.com/disclaimer for complete info. WARNING: The packaging components are classified as normal solid urban waste and can therefore be disposed of without difficulty. In any case, for suitable recycling, we suggest disposing of the products separately (differentiated waste) according to the current norms.
Installation 1. Remove the screws on the wooden boards with a screw driver or electric screw driver. CAUTION! Glass shelves are packaged separately. Be careful of the glass doors on the back of the equipment! 2. Remove the wooden boards, and carefully remove the glass shelves from equipment. 3.
Operation TEMPERATURE SETTING Warning: it is advised to have qualified personnel set the temperature. SET THE HIGHEST TEMPERATURE 1. Press the SET button for three seconds, and then there will be “C” flashing on the display. 2. Adjust the temperature by pressing the ▲ / ▼ buttons. 3.
Maintenance Exterior Weekly Acrylic: Clean with warm water, mild soap solution and soft cloth; acrylic cleaning solutions are also available. Caution! Incorrect cleaning agents or abrasive cleaning cloths can cause the surface to be scratched. Interior Monthly Condensing Coil: Turn off the power, remove magnetic rear grill. Vacuum or brush grill area on back;...
Page 11
Troubleshooting Compressor not working. The voltage exceeds the allowed Use voltage stabilizer and insert fluctuation range. proper power. Make sure the equipment operates normally. The output control loop of the Connect the loop. temperature controller disconnects. Temperature controller is Repair or replace the temperature damaged.
Parts Breakdown Model RE-CN-0354 43549 Model RE-CN-0483 43550...
Page 13
Parts Breakdown Model RE-CN-0354 43549 Item No. Description Position Item No. Description Position Item No. Description Position AG711 Bottom Front Panel for 43549 AG731 Front Curved Glass for 43549 AG749 Back Grill for 43549 AG712 Bottom Front Upper Panel for 43549...
Page 14
Parts Breakdown Model RE-CN-0483 43550 Item No. Description Position Item No. Description Position Item No. Description Position AG766 Bottom Front Panel for 43550 AG777 Front Curved Glass for 43550 AG788 Back Grill for 43550 AG767 Bottom Front Upper Panel for 43550 AG778 Shelf Glass for 43550 AG750...
Electrical Schematics Model RE-CN-0354 43549 Model RE-CN-0483 43550 Position Description Position Description Position Description Compressor Cooling Switch LED Light Evaporation Fan Lighting Switch 12V Power Supply Condensing Fan Anti Fog Switch...
Warranty Registration Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at the perforation and then send to the address specified below. You can also register online by visiting: Merci d’avoir acheté...
Page 20
Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North American food service industry. Our success over these many years can be attributed to our commitment to strengthen and develop new and existing relationships with our valued customers and manufacturers.