Table of Contents
Advertisement
2.
The calibration data should now be displayed in the Plot view. In the Properties view, go
to Analysis tab > Calibration tab.
3.
Select the Tu sensor type from the drop-down list.
4.
The Number of Samples field is automatically set to 100.
This value is the number of sample points Ruskin will average to calculate the calibration coefficients
for the sensor. Typically, this value should be in the range of 50 to 100 samples.
5.
Click on a stable point in the Plot view corresponding to 0 NTU. In the table in the first row, under Real
Avg, enter 0 and press enter.
6.
Ruskin automatically calculates the calibration coefficients, and the values appear in Calculated
coefficients. Clicking the Copy button saves the new calibration coefficients to the clipboard.
7.
Follow the steps
logger.
RBR#0006106revG
in Change calibration
coefficients to update the coefficients for this sensor in the data
– 55
Advertisement
Table of Contents
