Table of Contents
Advertisement
Do not disconnect the logger until the process is fully completed. Disconnecting the logger during this process
may render the logger inoperable.
If for some reason RBR needs to supply a version of firmware, the following method is used to manually update the
logger firmware.
Contact RBR for instructions before proceeding. This method of updating the firmware should only be
attempted with the assistance of RBR.
Click the Instruments menu > Update logger firmware.
Steps
1.
In the Instruments menu, click Update logger firmware.
The Update logger firmware dialog box will appear.
2.
Click the instrument drop down to select the instrument you wish to upgrade.
a.
A default firmware image will be selected for your instrument.
b.
If RBR supplied a firmware file click the Select file button and browse to the location of the
firmware update file provided. The file will have the extension .rbrfw.
3.
Click Proceed to start the firmware upgrade.
A progress bar shows the status of the upgrade. Once the firmware upgrade is complete, the message
Update completed successfully appears at the top of the dialog box.
4.
If the upgrade doesn't complete successfully, click Proceed again to retry until successful.
RBR#0006106revG
– 33
Advertisement
Table of Contents
