Table of Contents
Advertisement
The Mean depth of water parameter is not stored on the logger. It is only used to compute wave bandwidth
statistics for pre deployment analysis.
The Instrument altitude parameter is stored in the logger and is used calculating wave statistics. This
parameter can be adjusted post deployment through the RSK file.
This sampling mode can be activated by selecting Wave in the Mode drop down menu in the Sampling section on
the Configuration tab
There are two versions of the Wave Sampling section that can be used, either simple or advanced. This option can be
set in Preferences.
Simple form:
Advanced form - sampling at one second or slower:
Advanced form - sampling at 2, 4, 8, and 16 Hz
RBR#0006106revG
– 23
Advertisement
Table of Contents
