Spdata/Sys1/Amd.tab - IBM RS/6000 SP Problem Determination Manual

This soft copy for use by IBM employees only.
Service
The
top level directory if the
subdirectories based on the
table data is then collected in the other subdirectory created by the
command. If the
subdirectory. Note that you must have root authority to execute the
command.
View
The
in the input table to the local host. The following is an example of the
/spdata/sys1/amd.tab file:
Figure 73. /spdata/sys1/amd.tab
6.2.6 Collecting System Data
Create service collections
From SMIT, the fast path to invoke for the Create Service Collections menu is:
smit spcreate_collect
In the following example, service collections are created using the table file
ssp.tab.
information (
designated in the ssp.tab table will be collected in the other directory created by
snap
splm -a service -t /spdata/sys1/logtables/ssp.tab -p ' gfk' -c
The fast path to invoke for the Remove Service Collections menu is:
smit spremove_collect
service
function first calls the
-p
-p
option is not used, the data will be collected in the other
view
function displays the output of the command or contents of the entries
#
# This is a sample service collection table for amd problems.
# To use:
# 1. Uncomment lines to be collected.
# 2. Replace the target node list for each line with node names,
# a file containing node names, or a ! to designate the
# local node. (See the splm reference page)
# 3. Add to the node list or add additional collection commands
# if needed.
#
# In this table the following target nodes need to edited:
# allnodes - All nodes in the SP system
# amd_server - amd server node (usually the cws)
# cws - Control Workstation
#cws,allnodes: /etc/amd/amd-maps/* /amd-maps/
#amd_server: /etc/exports etc_exports
#amd_server: /etc/filesystems etc_filesystems
#cws,allnodes: /etc/amd/amq > amq.output
#cws,allnodes: /bin/df > df.output
#cws: /var/adm/SPlogs/amd/amd.log
snap -gfk
will be called to gather general system information (
-f
), and kernel information (
. The nodename.tar.Z compressed tar file will be created.
snap
command to gather system data to the
snap
option is used. The
-p arguments. The additional data defined in the
-k
). Additional log and system data
command creates a set of
snap
snap
-g
), file
Chapter 6. E r r o r Logging
173