How To Interpret The Chirps And Parking Light Flashes; How To Interpret The Led Status Indicator; Headlight Reminder - Clifford XL2000 Owner's Manual

As previously noted, button II (switch up) can control another
TO ACTIVATE AN
OPTION WHEN
option when the system is disarmed. This is most commonly
THE ALARM IS
used for an optional remote trunk release.
DISARMED . . . . . . .
Button IV (switch up) and I-IV with the switch down, may ac-
TO ACTIVATE AN
OPTION
tivate another remote controlled option, such as the Clifford In-
REGARDLESS OF
telliStart™ (remote engine starter accessory), electric garage
ALARM STATE . . . . .
door or another Clifford-equipped vehicle.

How to Interpret the Chirps and Parking Light Flashes

When you press the remote control buttons, the system will respond with chirps (unless
you have the chirp muting feature turned on) and flashes the parking lights to indicate
the system status. The meaning of these chirp/flash acknowledgments is as follows:
Chirps and flashes
1
2
2 and then 4
3
Alarm is disarmed and there was an intrusion attempt (see Smart Prior Intrusion Attempt)
4

How to Interpret the LED Status Indicator

The LED on your car's dashboard or console will inform you of the system status:
LED Condition
Off
On
Flashing
Pause between flashes

Headlight Reminder

If you turn the ignition off and open your door without having turned off the
headlights, you will be reminded to turn them off with four chirps. (Since this is a
warning, you will hear the chirps even if you have the chirp muting feature turned
on.) If you prefer, you may turn off the Headlight Reminder feature. See the
User-Selectable Features section on pages 9-10.
Meaning
Alarm is disarmed
Alarm is armed
Armed and there is a sensor malfunction (see Smart AutoTesting)
Armed and there is a trigger malfunction (see Smart AutoTesting)
Meaning
System is disarmed
Secured valet mode
System is armed
Either a malfunction or an intrusion was attempted
4