Clifford XL2000 Owner's Manual page 11

# of
Factory
flicks &
Feature setting
chirps
Siren
10
30 sec.
Duration
Tampering
11
OFF
Warning
FACT —
False Alarm
12
ON
Control and
Test
Add a New
Remote to
13
—
Channel 1
(arm/disarm)
Add a New
Remote to
Channel 2
14
—
(optional re-
mote
accessory)
Add a New
Remote to
Channel 3 (si- 15
—
lent arm/dis-
arm)
Add a New
Remote to
Channel 4
16
—
(optional
remote
accessory)
Built-In
17
30 sec.
Timer
WARNING:
If your built-in timer controls window/sunroof closure in your car
DO NOT change the timer setting! This requires installer-only programming.
Changing the value will adversely effect operation and may cause damage.
Secondary
action
confirmation
— seconds after
— seconds after
— seconds after
Press remote control button I
(switch UP)
Press remote control button II
(switch UP)
Press remote control buttons III
(switch UP)
Press remote control button IV
(switch UP)
3 seconds later, 1 chirp will
indicate that the timer has
started. When the desired
interval has passed,
turn off the ignition key.
10
Program
completion
Result
1 chirp 3
Change duration from 30
to 60 seconds or vice-versa
last step
1 chirp 3
Change state from
OFF to ON or vice-versa
last step
1 chirp 3
Change state from
OFF to ON or vice-versa
last tap
Button I/channel 1 code of
1 chirp new remote control has
been memorized
Button II/channel 2 code of
2 chirps new remote control
has been memorized
Button III/channel 3 code
3 chirps of new remote control
has been memorized
Button IV/channel 4 code of
4 chirps new remote control
has been memorized
Set to any interval between
—
1 second and 2.5 minutes