3.
If codes and diagnostic results are to be cleared, press the ENTER key directly.
√
If codes and test data are not to be deleted, select ESC, and a "Command
Canceled!" message displays prompting to press any key to return to
Diagnostic Menu.
4.
Wait a few seconds until a "Codes Cleared!" message shows indicating codes
have been cleared successfully.
√ If the code reader fails to clear the codes, a "Clear Error! Turn Key on with
NT200E OBDII/EOBD Code Reader User's Guide_English Version_V1.0
Clear Code
Are You Sure to
Clear Codes?
<YES>
NO
22