● Retrieve vehicle information.
√
The code reader detects the communication protocol when it is connected to the
vehicle and uses the protocol throughout the testing until another vehicle is
diagnosed.
√ If the code reader fails to communicate with the vehicle a "Communication
Error!" message displays. Make sure the OBDII connector is securely attached,
and the ignition key is on. Turn vehicle key to off for 10 seconds, then on. If the
problem still exists, refer to "Error Messages" on page 18 of Troubleshooting.
√ When the code reader links to a vehicle, it checks the status of I/M Monitors, and
gives a summary report on the display as illustrated below.
NT200E OBDII/EOBD Code Reader User's Guide_English Version_V1.0
15