√ If no DTCs are present a message stating "No (Pending) Codes Found" is
displayed.
√ If any manufacturer specific or enhanced codes are detected, a "Manufacturer
specific codes are found! Press any key to select
displays prompting you to select a vehicle make before viewing DTC(s).
√ If the manufacturer of the vehicle being tested is not listed, select Other.
5.
Press the ESC key to return to Diagnostic Menu screen.
3.2 Clearing DTCs
The Clear Codes function is used to delete DTCs and I/M Readiness data from vehicle's
control module(s). It may also erase freeze data, and set monitors to incomplete or not
ready.
√ Perform Clear Codes function only after systems have been checked
completely.
√ After servicing the vehicle, erase stored DTCs and verify no codes have been
NT200E OBDII/EOBD Code Reader User's Guide_English Version_V1.0
20
v
ehicle make!" message