Table of Contents
Advertisement
√ When emission-related or drivability fault occurs the control module illuminates
the malfunction indicator lamp (MIL).
√ Pending Codes are also referred to as continuous monitor or maturing codes
that indicate intermittent faults. If the fault does not occur within a certain
number of drive cycles (depending on vehicle), the code clears from memory. If
fault occurs a specific number of times, the code matures into a DTC and the
MIL illuminates or blinks.
√ This function can be performed with KOEO or KOER.
To read codes from vehicle control modules:
1.
Press the ENTER key to start diagnosis from home screen.
2.
Use the DUP/DOWN key to select Read Codes from Diagnostic Menu
screen.
NT200E OBDII/EOBD Code Reader User's Guide_English Version_V1.0
18
Advertisement
Table of Contents
