Job Details; Saving And Loading An Individual Job From A Usb Drive; Power Source Status Menu - Cebora 394 TIG Instruction Manual

9�1�6 JOB Details
9�1�7 Saving and loading an individual JOB from a USB drive
To save an individual JOB onto a USB drive:
Loading an individual JOB from a USB drive:
9�2

Power source status menu

The power source status menu displays information about the welding time, number of ignitions, power source internal
temperatures, amount of wire delivered, fan speed, gas pressures and flow rates.
To access the power source status menu, select Menu ->
82/107
Press the pushbutton
The following pushbuttons can be used:
- to edit the JOB name.
- to save all JOB settings in PDF format onto a USB drive.
Insert a backup drive into a USB port.
Select the JOB to be saved by turning B�
Press the pushbutton
The file is saved as file_name.zip.
Insert a backup drive into a USB port.
Turn B and select the memory location where the JOB is to be loaded Press
pushbutton
Select the previously saved job file_name.zip from the USB drive and
confirm by pressing B�
The JOB is loaded in the chosen position.
.
.