D-Link DIR-842 User Manual page 147

DIR-842 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Gigabit
Router
User Manual
Parameter
Ports
Wireless interfaces
Click the APPLY button.
To edit an existing VLAN, select the relevant line in the table. On the page displayed, change the
parameters and click the APPLY button.
To remove an existing VLAN, select the checkbox located to the left of the relevant line in the table
and click the DELETE button (
Select a type for each port included in the VLAN.
Untagged: Untagged traffic will be transmitted through the
•
specified port.
Tagged: Tagged traffic will be transmitted through the
•
specified port.
the VLAN, it is required to fill in the VLAN ID and QoS
fields.
Leave the Excluded value for the ports not included in the VLAN.
Select the Untagged value for each Wi-Fi interface included in the
VLAN.
Leave the Excluded value for the Wi-Fi interfaces not included in
the VLAN.
).
Page 147 of 233
Configuring via Web-based Interface
Description
If at least one port of this type is included to